7/16 DIN Male/Female Straight/Right Angle(R/A) 90° Degree Low PIM Low Insertion Loss Solder/Clamp Type for 1/2,7/8 Inch Super Flexible Feeder Cable Anti-Corrosion Connector

Product Detail

7/16 DIN RF Feeder Connector for Flexible 1/2”inch, 7/8” inch Cable:




RF Connector Specification Sheet:

Applicable Standard:

DIN47223; IEC169-4; CECC22190




Configuration:

¦ 7/16 DIN Female/Male Available;	¦ Match Cable: 1/2”inch, 1/2”s inch,1/4” inch, 7/8”inch, 1-5/8”inch
¦ Straight & Right Angle Type Available	¦ Length Customized
¦ Clamp & Solder type Provide	¦ Low VSWR & PIM Performance
Application:
¦ Microwave Telecom System	¦ Base Station
¦ Broadcast and TV System	¦ Telecom Network Project




Description:

7/16 DIN Feeder Connector series are screw coupling high power rating RF coaxial connectors, with characteristic of impedance 50O. HUAJIN 7/16 DIN RF Feeder Connectors have the characteristics of low power loss, low PIM, high power capacity, low VSWR, and waterproof. They are used to connect feeder cables transmitting high power RF signals in broadcast and TV system, base stations, telecom network project, antenna feeders, and microwave systems.




There are two typical assembly methods for 7/16 DIN Feeder Connector: clamp and solder type.

Clamp type is mostly used in on-site project, with advantage of easy operation, no necessary for taking extra equipment.

Solder type is often used to make cable assembly in factory, comparing with solder type, it has cost advantage and good performance.




Technical Data:




Interface		IEC 61169-16
Electrical
Characteristic Impedance		50O
Frequency Range		DC-3GHz
VSWR		=1.15
Dielectric Withstanding Voltage		=2500V RMS,50Hz,
Dielectric Resistance		=5000MO
Contact resistance	Inner conductor outer conductor	=1.0mO =1.0mO
Intermodulation		=-150dBc
Mechanical
Durability		Mating cycles =500
Material and plating
Part	Material	plating
Body	Brass	Tri-Alloy
Center conductor	Tin bronze	Ag
Insulator	PTFE	/
Other		Ni
Environmental
Temperature Range		-40?~+85?
Water tightness		IP67
RoHS		Compliant




7/16 DIN Feeder Connector is used for matching with feeder cable, most cable type is 1/2”, 1/2”sf, 7/8”, 1/4”, 1-5/8, etc.




HUAJIAN has a variety of 7/16 DIN feeder connector, including typical series as bellow:




Model	Gender	Assembly Method	Matching cable
7/16 DIN Straight	Male	Clamp/Solder	Flexible 1/2”,1/4”, Super-Flexible 1/2”sf
7/16 DIN Straight	Female	Clamp/Solder	Flexible 1/2”, 1/4”,Super-Flexible 1/2”sf
7/16 DIN Straight	Male	Clamp/Solder	Flexible 7/8”
7/16 DIN Right Angle	Male	Clamp/Solder	Flexible 1/2”, Super-Flexible 1/2”sf




Notes: 7/16 male for 1/2” cable, 7/16 male for super-flexible 1/2”s cable, 7/16 female for 1/2” cable, 7/16 female for super-flexible 1/2”s cable, 7/16 male right angle for 1/2” cable, 7/16 male for 7/8 cable.




All 7/16 DIN Feeder Connectors are ROHS compliant.




Outlines of 7/16 DIN Feeder Connector:








If you're looking for 7/16 din male/female straight/right angle(r/a) 90° degree low pim low insertion loss solder/clamp type for 1/2,7/8 inch super flexible feeder cable anti-corrosion connector, welcome to buy the factory price products in stock from our factory. As an experienced China manufacturer, we will offer good after-sale service and fast delivery.